DIY Lump of Coal

Leave a comment

coal6+

With Christmas just 4 months away it’s time to start thinking about gift ideas.

We all know someone who deserves this one 😉

These little fake pieces of coal are fun and easy to make.

Cover a piece of paper with craft glue, scrunch it up and let it dry.

coal1

coal2

coal3

If you’re planning on turning it into a necklace or earrings poke a hole through it using a darning needle then feed your head pin through the hole.  You can do this before or after it’s dry.

coal5

*NOTE* I included links to a few helpful youtube videos below for making jewelry and a cute little gift box.

After the glue is dry, paint it black.  When that dries brush on some gold or silver metallic paint.   Wipe it off while the paint is still wet so you get just a slight sparkle.

If you add too much just go over it again with black paint.  You can also add some glitter if you want more sparkle.

coal4

Snazz it up and wrap it up!!!

coal

make your own gift box  ➸  http://www.youtube.com/watch?v=czNH7kyt7ng

coal7

how to tie an adjustable knot for a necklace  ➸  http://www.youtube.com/watch?v=mnft-ewGbqQ

coal8

how to make earrings  ➸  http://www.youtube.com/watch?v=hl3Y8SkafEc

coal9

Anyway 😉

Hobbits, Fairies & Mice

4 Comments

Hobbits are described as members of an imaginary race similar to humans, of small size, with hairy feet.  Fairies are generally described as human in appearance with magical powers and mice are small mammals with pointed snouts and little rounded ears.    Who wouldn’t want any one of these little critters living in their garden!?

mousehouse3

With a few pieces of scrap wood, a scroll saw and some paint you can have hobbits, fairies or mice living in your garden.

cut out a small door – 6″ high x 4 1/2″ wide

hobbit1

cut 2 half circles out of wood for the bridge

hobbit2

cut 2 1/2″ pieces of wood trim, glue and nail them on the half circles to make the bridge

hobbit3

hobbit5

cut more 2 1/2″ pieces of trim to use for stairs

I painted some wood grain and a door frame on the door  and painted my hinges black with outdoor deco art patio paint

I used a little wooden bead for the door knob, painted it black and screwed it on.

I glued the wooden heart on the door with outdoor wood glue, then put 2 small drill holes through the heart and inserted fishing line so I could tie the door to a tree trunk.

I added a bit of brown paint to the stairs and bridge to make it look like wood grain then varnished all pieces with water based outdoor varnish.

hobbit4

mousehouse1

mousehouse2

I gotta say it looks pretty darn cute at night with the garden lights on.  A little magic door for tiny little critters.

If you don’t feel like making your own but would love one in your garden they can be custom ordered in my etsy shop.

Anyway 😉

DIY Step ‘n Wash

Leave a comment

stepnwash10

I’m not a professional woodworker but I do have fun with a few small tools.

I was able to make this stool for 1/4 of  the  price it would cost to buy one and it was pretty easy to make so I thought I would share.

Using a jigsaw cut 2 pieces out of your choice of wood into an “L” shape.  I used 2 pieces of pine shelving – 16″ x 36″ each

L1

Drill holes big enough to get your jigsaw blade through to cut out the handles.

Use the extra pieces from the sides for the steps. The 1st step is 7 1/2″ high and the top step is 15″ high.

Measure and drill 4 pilot holes for the screws on each step side and drill a bigger hole to countersink the screws and add wooden plugs to cover the screws.

how to countersink a wood screw here

L2

Sand all the edges and handles, then paint it or stain it.

To personalize it trace your pattern onto tracing paper then transfer it onto the stool using white or black graphite paper.

stepnwash2

stepnwash3

stepnwash4

stepnwash5

stepnwash6

Once the 1st side was painted I retraced it onto tracing paper and flipped it to do the other side.

I kept a picture on my phone and my computer to refer to while I painted the second side.

You could do your personalizing before you put it together which would make it easier to maneuver while you’re painting

stepnwash8

Lay the stool down on a piece of mdf , trace it and cut out for a back piece. Glue and nail it on.  I measured and added 2 front pieces under each step for extra support (optional).

I finished it off with a coat of outdoor water based varnish that will protect it from all the water splashes from little people climbing up to wash their hands, brush their teeth or help with the dishes etc 🙂

stepnwash11

❤❤❤ little miss independent ❤❤❤

Anyway 😉

Upcycled for Easter

4 Comments

EB

So you may have noticed that I haven’t blogged since October.  I’ve changed my mind about blogging about every little I make.   I’ve decided (for now) that I will probably only blog when I feel I have something good and crafty to share with you which is why I am here today.

This Easter Basket took me 30 minutes to make.  It’s pretty darn cute and it’s recycling plastic. Cans will work too.  All you need is a glue gun, some quilt batting (optional) and some material and the possibilities are endless.  You can use ice cream, margarine, yogurt, salad containers, coffee cans etc!!!

e-b1

e-b2


e-b4

e-b3

e-b5

e-b6

e-b7

e-b8

e-b9

e-b11

e-b10

add a big bow on the front or two little bows on the handles and you have yourself a cute little basket!

EB

anyway 😉

Stools That Spin Are More Fun!!!

Leave a comment

Turn a Plain Stool into a Swivel Stool

1)   unscrew stool top from the legs

2)   get yourself a richelieu swivel plate from any hardware store. cut a 1” plywood base a little smaller than the top of the stool

3)   paint and decorate stool top, legs and plywood base

4)   the swivel plate has small screw holes on one side and bigger screw holes on the other side.  centre the swivel plate on the plywood base with the small screw holes down – screw in place

5)   drill one hole only right through the plywood using one of the bigger screw holes as a guide

6)   centre plywood base on stool top with the wrong sides together.  looking through the drill hole, line it up with the swivel plate screw holes and add screws in all 4 holes

7)   centre legs on plywood bottom, screw in place and voila your plain old stool is now a fun swivel stool

I painted the above stool with deco art patio paint so it can be used outside and the stool below was swivelled and painted with deco art acrylics about 5 years ago. I painted a set of 3 for my breakfast bar.  They have had a lot of use and abuse and are still in great shape.  

There is so many things that would be so much better if we could spin ’em 🙂

**********************************************************************

Anyway 😉


Chalkboard Placemat

2 Comments

 How to make a personalized chalkboard placemat

These are handy to have when you’re taking the kids out for dinner.  They help to keep them busy while waiting for their food.  They’re pretty easy to make.  If you don’t feel like making your own they are for sale in my

Etsy shop.

Supplies needed – drapery black out also known as roc-lon sold at most fabric stores,  chalkboard paint (I buy mine in a can from the paint dept at Home Depot),  a roll of 1″ painters tape, a straight edge ruler, a paint brush,  fine sandpaper and a piece of ribbon

 Drapery Black Out / Roc-Lon  – make the side that is more rubbery the back of the placemat

 with a straight edge ruler measure, mark and cut an 18″ x 12″ size placemat

 tape off the edges with 1″ painters tape

 paint along tape line to avoid pushing paint under the tape. do 2 coats of chalkboard paint then sand lightly and touch up with one last thin layer of paint. when it’s dry flip it over and paint the back side solid chalkboard

 remove the tape and paint the border whatever colour you want.  I use patio paint for more durability but any waterproof acrylic paint will work

to personalize I use my cricut. if you don’t have a cricut (I suggest you put one on your wish list because they are fun!!!) you can use alphabet stencils or freehand

don’t worry about the paint that bled a little under the tape edges. the next step will cover that.

 paint around the edge of the chalkboard paint and the letters with short and long paint strokes leaving random spaces in between the lines that you will be filling in with paint dots

dot the painted edges using anything that will make a round dot.  I dip the end of a paintbrush in the paint or a pen tip for smaller dots. touch up the paint splatters with chalkboard paint

sew a 20″ piece of ribbon folded in half to the end of the placemat on the front side either by hand or with your sewing machine.  to cover the thread on the back paint over it with the chalkboard paint. let the paint dry and cure for a day or 2 to prevent the dots from sticking when you roll it up.  tie a piece of chalk into the bow and you’re done 🙂