DIY Styrofoam Yard Displays

Leave a comment

Start by sketching on a piece of paper whatever you want to cut out of your styrofoam.

Once you get your pattern done you can either freehand it lightly  or project it onto the styrofoam.

As long as you don’t press too hard while sketching you can cover up any mistakes with a light sanding and paint.

When you’re happy with your pattern cut it out with an exacto knife.  This is easy but messy. After you have it cut out you’ll need to sand the edges with sandpaper to remove all the little loose pieces,  just when you thought it couldn’t get messier 😉

If you’re sweeping, rather than vacuuming it helps to spray a little water on the broom and the floor to help sweep up the all the staticy little pieces of styrofoam.

Now for the fun part… painting!!!  Styrofoam is one of my favourite surfaces to paint on. It’s so easy to blend and float paint on.  I used regular Deco Art paints for mine and they’ve been fine outdoors in wind, rain & snow.

After you’re done painting, glue a piece of wood to the back with an all weather glue, screw a smaller piece of wood to the bottom with a hole drilled in it so you can stake your display in the ground.

You can also add a small screw to the wood near the top.   Then you can tie fishing line to the screw so you can tie the display to a fence or railing for added security from the wind.

Hopefully it’s awhile yet before we see this white stuff!!!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s